smartctlerror

2017年1月20日—1,ReadErrorRate,底层数据读取错误率;5,ReallocatedSectorCount,重定位磁区计数;10,SpinRetryCount,电机起转重试;196,ReallocationEvent ...,2008年9月21日—Ifanyerrorsweredetected,theLogicalBlockAddress(LBA)ofthefirsterrorisprintedindecimalnotation.i.e..smartctl-lerror/dev/sdd,Whenthecommandthatcausedtheerroroccurred,thedevicewasactiveoridle.Aftercommandcompletionoccurred,registerswere:.,s...

smartctl-health

2017年1月20日 — 1, Read Error Rate, 底层数据读取错误率 ; 5, Reallocated Sector Count, 重定位磁区计数 ; 10, Spin Retry Count, 电机起转重试 ; 196, Reallocation Event ...

硬碟的健康檢查(SMART) - smartmontools

2008年9月21日 — If any errors were detected, the Logical Block Address (LBA) of the first error is printed in decimal notation. i.e.. smartctl -l error /dev/sdd

smartctl

When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were:.

SMART 磁碟健康檢測 - 自由軟體系統應用筆記

smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-5-amd64] (local build) ... 1 Raw Read Error Rate 讀取錯誤率代表硬碟出現瑕疵. 2 Throughput Performance 輸出 ...

smartctl + what are the Total uncorrected errors means

2022年4月10日 — Total uncorrected errors specifies the total number of blocks for which an uncorrected data error has occurred. If the disk firmware has ...

what is the indications from smartctl that show bad status ...

2018年11月22日 — what is the final status that indicates that disk is bad or good? smartctl -a /dev/sdb smartctl ... Error counter log: Errors Corrected by Total ...

interpreting smartctl, is a hard drive failing?

2023年1月25日 — the smartctl errors are ~1500 power on hours ago so whatever happened there it's not something current. temperature seems a bit high, the drive ...

smartctl查看错误日志失败

2023年3月6日 — smartctl查看错误日志失败 · 1. 问题. Error Counter logging not supported · 2. 原因分析. 测试时,为了便于操作,使用了raid0 · 3. 解决. 使用jbod直通 ...

Smartctl shows errors in "error log" but disk PASSED and ...

2023年2月6日 — Smartctl shows errors in error log but disk PASSED and self-test completed without error, can/should I still use it in ZFS RAID? ... SMART ...

Analyzing a Faulty Hard Disk using Smartctl

2020年5月26日 — The hard disk in this example is showing increased errors for multiple SMART settings. root@ubuntu-10-10:~# smartctl -a /dev/sdb smartctl 5.40 ...